Digital Charging Bay Indicators – D-CBI

Estimated reading time: 1 min

The Digital Charging Bay Indicator is an enhanced version of the classic CBI.

The D-CBI is a full digital version of the classic CBI. It also has the 3 additional voltage sensor Leds direct on the pcb.
It’s possible to break them away and remove them or to place somewhere else connected via wires.

If you want to connect it to a classic DPL you need to modify the code!

Available at shop.printed-droid.com

A modified plate and the lens stls are at the bottom

Turning Panels on/off via magnet:

To make DPL and CBI turn on and off depending on whether the panel is open, Printingbuddy uploaded STLs to Makerworld to trigger a reed switch using a magnet.
The magnet is mounted on the servo horn, and when it approaches the switch, the light of the respective board turns off.

Files:
https://makerworld.com/de/models/1080664-r2-d2-dpl-door-servomount-with-reed-contact#profileId-1072371
https://makerworld.com/de/models/1080648-r2-d2-cbi-door-servomount-with-reed-contact#profileId-1072356

D-CBI
Tags:
Was this article helpful?
Dislike 0 3 of 3 found this article helpful.
Views: 2593
Previous: Charging Bay Indicators+ – CBI+
Next: D-DPL AstroCan