Servo Power Board

Estimated reading time: < 1 min

The Servo Power board is for the classic Marcduino compact. The Marcduino can’t provide enough power for all servos at the same time – you’ll notice it on sequences when you get a brownout and the Marcduino resets.

The Servoboard gets only the signal wires from the Marcduino and has it’s own power input for the servos. Please use a stable power source (5-6V >2.5A)

Available at shop.printed-droid.com

Tags:
Was this article helpful?
Dislike 0 2 of 2 found this article helpful.
Views: 643
Previous: Relay Board
Next: Fused 24 Wire Slipring Interface